BLE

Three-step workflow for KL-OSIRIS — connect hardware, launch the software, take measurements — with a list of compatible SenseID and SenseBLE evaluation boards and a summary of what you get in 30 minutes.

2026-04-21 by Mikel Choperena

Step-by-step guide to taking your first battery-free sensor measurement with KL-OSIRIS, Kliskatek’s free evaluation software. Connect a reader, place a tag, see live data in under 30 minutes.

Diagram showing one shared sensing core at the top branching into three protocol paths — SenseID (EPC C1G2), SenseBLE (BLE burst) and SenseNFC (NFC) — each with different infrastructure requirements but identical sensing capabilities.

2026-03-31 by Mikel Choperena

SenseID, SenseBLE and SenseNFC use the same battery-free sensors. The difference is the communication protocol and the infrastructure you need. Here’s how to choose.

Warehouse floor with battery-free sensor tags on pallets, showing two communication options: EPC C1G2 via RFID reader or BLE burst via RF transmitter and BLE gateway — same sensors, different infrastructure.

2026-03-24 by Mikel Choperena

Battery‑free sensors for warehouse weight, ID and environmental monitoring. Choose EPC C1G2 (SenseID) or BLE (SenseBLE) based on your infrastructure — the sensors are the same.

gri 4.0: Soil & Irrigation with RFID/BLE + Occasional NFC Checks

2026-03-17 by Mikel Choperena

Hybrid Agri 4.0 playbook: battery‑free RFID at touchpoints, BLE for row‑level trends, and NFC spot checks—with cells, message contracts, and acceptance tests.

Cold‑room and dock scene with RFID read‑zone arcs and a BLE gateway indicating local coverage at a site; intended for controlled areas only—transit needs battery‑powered data loggers.

2026-03-03 by Mikel Choperena

Battery‑free cold‑chain at sites using UHF RFID and touchpoint BLE—rooms, docks, portals. For in‑transit visibility, use battery‑powered data loggers.

Get in Touch

Visit Our Location

Join Our Team